CB750F: Day 23: Engine Polishing Continues

On the way to the shop I stopped at Harbor Freight and bought a 7-pack of 500 grit wet/dry sandpaper, and boy it finishes fast. The “you are going to need patience” advice kicked in tonight. It was so strange, after hand-sanding and also trying out the tiny little brash brush with the Dremel, I thought that it was getting close to the metal but Pat showed me how there was still clear-coat on there. What?!
You can’t see it, and it is very shiny, but you can feel it. It feels like the fine grain of a leather jacket, and it has kind of a different finish than the edges where you can feel that all of the clear-coat is gone. Numerous breaks were necessary, and the dish-washing gloves helped. The Dremel was pretty helpful for digging crud out of some of the tight spots, and I’ll need to buy some new tips.
Pat brought in his recommended choke and throttle lube, Remington Wonder Lube.

20130321_200530
20130321_200536
20130321_201151
20130321_201204
20130321_205522

5 thoughts on “CB750F: Day 23: Engine Polishing Continues”

  1. Could you tell me where I can buy Wonder Lube
    in the spray can? It is GREAT stuff.
    In Manchester, or Concord, N. H.
    Thank you.
    Noella Thibeault
    30 River Rd.
    Allenstown, N. H.
    03275

  2. NOELLA:
    Never have been able to find that product again; and I do keep searching!

Leave a Reply to Grant Cancel reply

Your email address will not be published. Required fields are marked *